南宁叉车轴承可以持久润滑的主要因素！

叉车轴承不同于其他通用轴承，在工艺、轴承材料、性能等方面都优于通用轴承。工业装卸车辆广泛应用于码头、车站、机场、货运站、工厂、车间、仓库、中转中心和物流中心等，并可进入舱室、车厢和集装箱内进行货物的托盘装卸、运输作业。托盘运输，集装箱运输不可缺少的设备。下面为我们介绍南宁叉车租赁叉车轴承。
forklift bearings are different from other general bearings, and superior to general bearings in technology, bearing material, performance, etc. industrial loading and unloading vehicles are widely used in terminals, stations, airports, freight stations, factories, workshops, warehouses, transit centers and logistics centers, and can enter the cabins, carriages and containers for pallet loading and unloading and transportation of goods. pallet transportation is an indispensable equipment for container transportation. next, we will introduce the forklift bearing rental.
叉车在企业物流系统中占有非常重要的地位，是物资输送设备的主要力量。广泛应用于车站、港口、机场、工厂、仓库等国民经济部门，机械化装卸、堆垛及短途运输的高效设备。
forklift plays a very important role in the enterprise logistics system, and it is the main force of material transportation equipment. widely used in stations, ports, airports, factories, warehouses and other sectors of the national economy, mechanized loading and unloading, stacking and short-distance transportation of efficient equipment.
特别是随着我国经济的快速发展，大部分企业的物资转移已由原来的手工转移，由机械转移的叉车取代。因此，在过去的几年里，中国对叉车购物中心的需求以每年两位数的速度增长。
especially with the rapid development of china's economy, most of the enterprises' material transfer has been replaced by the original manual transfer and the mechanical transfer of forklift. as a result, in the past few years, china's demand for forklift shopping centers has grown at a double-digit rate every year.
叉车轴承是光滑的,首先打开盖板,观察分离轴承的磨损状态,如果轴承没有损坏或磨损超出极限,然后去掉离合器踏板,调整心轴,使分离轴承及其最后的位置,座椅靠背与喷嘴黄油枪轴承轴承轴承孔填满黄油,直到轴承油溢出。
the forklift bearing is smooth. first, open the cover plate and observe the wear condition of the release bearing. if the bearing is not damaged or the wear exceeds the limit, then remove the clutch pedal and adjust the spindle to make the release bearing and its final position. the seat back and nozzle grease gun bearing bearing bore are filled with grease until the bearing oil overflows.
然后稍微滚动轴承，再次上油，重复上述操作，直到轴承周围有少量黄油溢出，然后使轴承滚动，调查油的量，如果感觉到轴承滚动阻力，证明轴承已注满黄油。然后去掉洒在轴承座上的几块黄油，从轴承开始调整轴承。
then roll the bearing slightly, apply oil again, and repeat the above operations until a small amount of grease overflows around the bearing, then roll the bearing, investigate the amount of oil, if the bearing rolling resistance is felt, it is proved that the bearing has been filled with grease. then remove a few pieces of grease sprinkled on the bearing seat, and adjust the bearing from the bearing.